|Home||» Products||» Hydraulic Clamping Cylinder: Products by HY-POWER||» Die Clamping Cylinder|
Die Clamping Cylinder
Die Clamping Cylinder is pull type, Spring return cylinder . An integral 'T' , suitable to 28 mm 'T' slot, is provided to the piston rod of the cylinder .
These cylinder are widely used in the quick change of dies & tools on presses.
For changing the tool , first the cylinder pressure is released and the cylinders are moved away from the tool , either manually or by a pneumatic cylinder . After changing the tool , cylinders are placed back at the clamping points and are pressurised .
Maximum Operating pressure - 200 bar
- Two separate circuits should be used for two diagonals of the tool (Tanden Clamping ). This feature is must for the safety purpose .
- Cylinder stroke is only 8mm . Clamping height of different tool must be the same with the tolerance of -+ 1mm . Specify dimension 'H' (Clamping height of the tool), While ordering the cylinder .
- T Slot dimensions are as per DIN 650 . For different T slot dimensions give all the details .
- For ordering the seal kit , add the prefix 'S' to the part number.
- Contact Details